Honeywell Midas LonWorks Interface Module Transmitter Connection

LonWorks Module for Midas® Transmitter Connection

Optional LonWorks interface module that mounts to and connects with any single, universal Midas® extractive transmitter with or without Pyrolyzer (order these separately) to provide bi-directional LonWorks connectivity; remote reset and remote control of the onboard relays. Unit is 24V DC powered and provides power and communications directly to the attached Midas® transmitter using special ethernet cross over cable (supplied). Includes Quick Start Guide and mounting bracket to the Midas® transmitter; rear panel installation screws are not supplied.

Midas® Gas Detector Transmitter & Sensor Combination

Extractive Midas® transmitters (universal) operate with sensor cartridges, for use as a local gas detector. Sensor Cartridges must be ordered separately. Units are powered by 24VDC or via Power over Ethernet PoE. Transmitters provides 0-22mA analog and Modbus/TCP Ethernet as standard outputs. Integral relays for A1, A2 and fault are included, and may be wired normally open or normally closed, latched or unlatched. Transmitters include Manual, Quick Start Guide, and (1) PG16 gland fitting for power in and relays out, 1/4" O.D.x 1/8" I.D. Sample Inlet tubing (10') [3m], 1/4" O.D x 3/16" I.D. Exhaust tubing (10') [3m], and a sample line tubing duct adapter (1283K1090).  Order a sensor cartridge separately for each transmitter.

Order the following parts for a complete Midas® System:

1. Midas® or Midas® transmitter and cartridge kit
2. Sensor cell (if combo kit not purchased)
3. Sample and exhaust tubing
4. End of line filters